isosizeのヘルプ・マニュアル
日本語 英語
isosize --help
man isosize
ISOSIZE(8) SG_UTILS ISOSIZE(8)
名前
isosize - iso9660 ファイルシステムの長さを出力する
書式
isosize [-x] [-d ] ...
説明
このコマンドは、与えられたファイルに含まれる iso9660 ファイルシステムの
長さを出力する。ファイルは通常のファイルでもブロックデバイス ( 例 え ば
/dev/hdd や /dev/sr0) でもよい。スイッチ (またはエラー) がない場合、
iso9660 ファイルシステムのサイズをバイト単位で出力する。現在では大き な
数 (> > 4 GB) になることもある。
-x ブロックカウントとブロックサイズを人に可読な形式で出力する。出力
では「ブロック」に対して「セクタ」という言葉が使われる。
-d
"-x" が指定されていない場合にのみ効果がある。 (エラーがない場合)
出力される数値は、 で分割されたバイト単位での iso9660 ファ
イルシステムのサイズである。よって、 がブロックサイズの場合
、出力される数値はブロックカウントになる。
iso9660 ファイルシステムを含むファイル (またはブロックデバイス) のサイ
ズは、 iso9660 ファイルシステムの実際のサイズより少し大きい。この理由の
1 つは、cd ライタが iso9660 イメージの後に "run out" セクタを追加できる
ことにある。
sg3_utils-0.91 December 2000 ISOSIZE(8)
ISOSIZE(8) SG_UTILS ISOSIZE(8)
NAME
isosize - outputs the length of an iso9660 file system
SYNOPSIS
isosize [-x] [-d ] ...
DESCRIPTION
This command outputs the length of an iso9660 file system that is con-
tained in given file. That file may be a normal file or a block device
(e.g. /dev/hdd or /dev/sr0). In the absence of any switches (or errors)
it will output the size of the iso9660 file system in bytes. This can
now be a large number (>> 4 GB).
-x output in humanly readable form the block count and the block
size. Output uses the term "sectors" for "blocks".
-d
only has affect when -x is not given. The number output (if no
errors) is the iso9660 file size in bytes divided by . So
if is the block size then the output number will be the
block count.
The size of the file (or block device) holding a iso9660 file system
can be marginally larger than the actual size of the iso9660 file sys-
tem. One reason for this is that cd writers are allowed to add "run
out" sectors at the end of a iso9660 image.
sg3_utils-0.91 December 2000 ISOSIZE(8)