lesskeyのヘルプ・マニュアル
日本語 英語
lesskey --help
man lesskey
LESSKEY(1) LESSKEY(1)
名前
lesskey - less のキー割り当てを指定する
書式
lesskey [-o output] [--] [input]
lesskey [--output=output] [--] [input]
lesskey -V
lesskey --version
説明
lesskey は less で使われるキー割り当てのセットを指定するために使われる
。入力ファイルはキー割り当てを記述したテキストファイルである。入力フ ァ
イルが "-" のときは、標準入力が読まれる。入力ファイルが何も指定されない
ときは、使用しているシステムに応じた標準のファイル名が入力ファイルの 名
前 と し て使われる。 Unix では $HOME/.lesskey が使われる。 MS-DOS では
$HOME/_lesskey が使われる。 OS/2 では $HOME/lesskey.ini が 使 わ れ 、
$HOME が定義されないときは $INIT/lesskey.ini が使われる。出力ファイルは
less で使われるバイナリファイルである。出力ファイルが何も指定されておら
ず 、環境変数 LESSKEY が設定されている場合、 LESSKEY の値が出力ファイル
の名前として使われる。 LESSKEY が指定されていない場合は、使用しているシ
ステムに応じた標準のファイル名が出力ファイルの名前として使われる。 UNIX
と OS-9 では $HOME/.less が使われる。 MS-DOS では $HOME/_less が使われ
る 。 OS/2 では $HOME/less.ini が使われ、 $HOME が定義されないときは
$INIT/less.ini が使われる。出力ファイルが既に存在する場合、 lesskey は
出力ファイルを上書きする。
-V と --version オプションは、 lesskey にバージョン番号を表示させて、す
ぐに終了させる。 -V または --version オプションが指定された場合、他のオ
プションと引き数は無視される。
入力ファイルは、いくつかの セクションから構成される。各セクションは、セ
クションのタイプを識別する行から始まる。指定できるセクションを以下に 示
す。
#command
新しいコマンドラインキーを定義する。
#line-edit
新しいライン編集キーを定義する。
#env 環境変数を定義する。
空白行と特別なセクションヘッダ行を除く、シャープ記号 (#) から始まる行は
無視される。
コマンドセクション
コマンドセクションは次の行から始まる。
#command
コマンドセクションがファイルの中での最初のセクションである場合、この 行
は 省略することもできる。コマンドラインセクションは次の形式の行から構成
される。
string action [extra-string]
whitespace (空白) とはスペースとタブを 1 つ以上並べた も の で あ る 。
string はアクションを起こすコマンドキーである。 string は 1 つのコマン
ドキー、または 15 個までのキーである。 action は下のリストにあ る less
の アクションである。 string 中の文字はコマンドの文字通り、もしくは、コ
ントロールキーを示すためにキャレット (^) を前において表す。バックスラッ
シュと、それに続く 3 桁までの 8 進数は、文字を 8 進数で指定するために使
われる。バックスラッシュとその後に続く文字により、次のような入力文字 を
指定する。
\b BACKSPACE
\e ESCAPE
\n NEWLINE
\r RETURN
\t TAB
\ku UP ARROW
\kd DOWN ARROW
\kr RIGHT ARROW
\kl LEFT ARROW
\kU PAGE UP
\kD PAGE DOWN
\kh HOME
\ke END
\kx DELETE
バ ックスラッシュの後に続く上に挙げた以外の文字は、その文字が特殊文字と
してでなく、文字通りに使われることを意味している。バックスラッシュを 前
に 置かなければならない文字は、キャレット・スペース・タブ・バックスラッ
シュ自身である。
アクションの後に "extra" string を続けることもできる。 less が実行さ れ
て いるときにそのようなコマンドが入力されると、アクションが実行された後
、extra string が less で入力されたときと同じように解釈される。この特色
はコマンドの機能を拡張する場合に使われる。下の "{" と ":t" コマンドの例
を参照すること。アクションが "quit" の場合、extra string は特別な意味を
持 つ。 less が終了するとき、extra string の最初の 1 文字が終了ステータ
スとして使われる。
例
下の入力ファイルは、less で使われるデフォルトのコマンドキーセットを表し
ている。
#command
\r forw-line
\n forw-line
e forw-line
j forw-line
\kd forw-line
^E forw-line
^N forw-line
k back-line
y back-line
^Y back-line
^K back-line
^P back-line
J forw-line-force
K back-line-force
Y back-line-force
d forw-scroll
^D forw-scroll
u back-scroll
^U back-scroll
\40 forw-screen
f forw-screen
^F forw-screen
^V forw-screen
\kD forw-screen
b back-screen
^B back-screen
\ev back-screen
\kU back-screen
z forw-window
w back-window
\e\40 forw-screen-force
F forw-forever
R repaint-flush
r repaint
^R repaint
^L repaint
\eu undo-hilite
g goto-line
< goto-line
\e< goto-line
p percent
% percent
\e[ left-scroll
\e] right-scroll
\e( left-scroll
\e) right-scroll
{ forw-bracket {}
} back-bracket {}
( forw-bracket ()
) back-bracket ()
[ forw-bracket []
] back-bracket []
\e^F forw-bracket
\e^B back-bracket
G goto-end
\e> goto-end
> goto-end
= status
^G status
:f status
/ forw-search
? back-search
\e/ forw-search *
\e? back-search *
n repeat-search
\en repeat-search-all
N reverse-search
\eN reverse-search-all
m set-mark
’ goto-mark
^X^X goto-mark
E examine
:e examine
^X^V examine
:n next-file
:p prev-file
:x index-file
- toggle-option
:t toggle-option t
s toggle-option o
_ display-option
| pipe
v visual
! shell
+ firstcmd
@ rotate-right
H help
h help
V version
0 digit
1 digit
2 digit
3 digit
4 digit
5 digit
6 digit
7 digit
8 digit
9 digit
q quit
Q quit
:q quit
:Q quit
ZZ quit
優先順
lesskey で 指定されるコマンドは、デフォルトのコマンドより優先される。
action を "invalid" としたコマンドを入力ファイルに入れておくと、デフ ォ
ルトのコマンドキーを使用不可にすることができる。また、action のところを
"noaction" と記述することで、そのキーは何もしないと定義される。 "noac-
tion" は "invalid" に似ているが、 less は "invalid" コマンドに対してエ
ラーのビープ音を鳴らすが、 "noaction" コマンドに対しては何もしない。 さ
ら に、次のコントロール行を入力ファイルに追加すると、全てのデフォルトの
コマンドが不可にできる。
#stop
これにより、全てのデフォルトコマンドは無視される。 #stop 行は、ファイル
のそのセクションの最後の行に置かれなければならない。
#stop は危険であることを理解しておかなければならない。 #stop により全て
のデフォルトコマンドが不可にされるので、必要な全てのアクションを可能 に
するためには #stop 行の前に必要なコマンドを指定しなければならない。例え
ば、"quit" コマンドを指定しないと使いづらくなる。
ラインエディットセクション
ラインエディットセクションは次の行で始まる。
#line-edit
このセクションは、#command セクションで一般のコマンドの新しいキー割り当
て を指定したときと同じやりかたで、ラインエディットコマンドの新しいキー
割り当てを指定する。ラインエディットセクションは、下の例のように 1 行毎
のキーとアクションのリストからなる。
例
下の入力ファイルは、less で使われるデフォルトのラインエディットキーのセ
ットを記述している。
#line-edit
\t forw-complete
\17 back-complete
\e\t back-complete
^L expand
^V literal
^A literal
\el right
\kr right
\eh left
\kl left
\eb word-left
\e\kl word-left
\ew word-right
\e\kr word-right
\ei insert
\ex delete
\kx delete
\eX word-delete
\ekx word-delete
\e\b word-backspace
\e0 home
\kh home
\e$ end
\ke end
\ek up
\ku up
\ej down
LESS 環境変数セクション
環境変数セクションは次の行から始まる。
#env
この行の後には、環境変数の割り当てリストが続く。各行は、環境変数名・ イ
コ ール記号 (=)・環境変数に割り当てる値、で構成される。イコール記号の前
後の空白は無視される。この方法で割り当てられる変数は、 less でしか参 照
されない。ある変数がシステム環境でも lesskey ファイルでも指定されている
場合、 lesskey ファイルでの値が優先される。 lesskey ファイルは環境変 数
を上書きするために使うこともできるが、 lesskey ファイルで環境変数を設定
する主な目的は、 less の全ての設定情報を 1 つのファイルに収めることであ
る。
例
下 の入力ファイルでは、 less を常に -i オプションをつけて実行し、文字セ
ットを "latin1" にするように指定している。
#env
LESS = -i
LESSCHARSET = latin1
関連項目
less(1)
警告
上矢印のような特殊キーをキーボードに依存しない方法で指定することは不 可
能 である。そのような特殊キーを指定する唯一の方法は、そのキーが押された
ときにキーボードが送るエスケープシーケンスを指定することである。
MS-DOS と OS/2 では、NUL 文字 (0) で始まる文字列を送るキーがある。こ の
NUL 文字は、lesskey ファイルで \340 と表される。
著作権
Copyright (C) 2000 Mark Nudelman
lesskey is part of the GNU project and is free software; you can redis-
tribute it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either version 2,
or (at your option) any later version.
lesskey is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License along
with lesskey; see the file COPYING. If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
著者
Mark Nudelman
バ グの報告やコメントは、上のアドレスか bug-less@gnu.org へ送って下さい
。
パッチ
Copyright (c) 1994-2000 Kazushi (Jam) Marukawa, Japanized routines
only
Comments to: jam@pobox.com
You may distribute under the terms of the Less License.
[参考訳]
Copyright (c) 1994-2000 Kazushi (Jam) Marukawa, 日本語化ルーチンのみ。
コメントは jam@pobox.com へ送って下さい。
このパッチは Less ライセンスの下で配布できる。
Version 358: 08 Jul 2000 LESSKEY(1)
LESSKEY(1) LESSKEY(1)
NAME
lesskey - specify key bindings for less
SYNOPSIS
lesskey [-o output] [--] [input]
lesskey [--output=output] [--] [input]
lesskey -V
lesskey --version
DESCRIPTION
Lesskey is used to specify a set of key bindings to be used by less.
The input file is a text file which describes the key bindings, If the
input file is "-", standard input is read. If no input file is speci-
fied, a standard filename is used as the name of the input file, which
depends on the system being used: On Unix systems, $HOME/.lesskey is
used; on MS-DOS systems, $HOME/_lesskey is used; and on OS/2 systems
$HOME/lesskey.ini is used, or $INIT/lesskey.ini if $HOME is undefined.
The output file is a binary file which is used by less. If no output
file is specified, and the environment variable LESSKEY is set, the
value of LESSKEY is used as the name of the output file. Otherwise, a
standard filename is used as the name of the output file, which depends
on the system being used: On Unix and OS-9 systems, $HOME/.less is
used; on MS-DOS systems, $HOME/_less is used; and on OS/2 systems,
$HOME/less.ini is used, or $INIT/less.ini if $HOME is undefined. If
the output file already exists, lesskey will overwrite it.
The -V or --version option causes lesskey to print its version number
and immediately exit. If -V or --version is present, other options and
arguments are ignored.
The input file consists of one or more sections. Each section starts
with a line that identifies the type of section. Possible sections
are:
#command
Defines new command keys.
#line-edit
Defines new line-editing keys.
#env Defines environment variables.
Blank lines and lines which start with a pound sign (#) are ignored,
except for the special section header lines.
COMMAND SECTION
The command section begins with the line
#command
If the command section is the first section in the file, this line may
be omitted. The command section consists of lines of the form:
string action [extra-string]
Whitespace is any sequence of one or more spaces and/or tabs. The
string is the command key(s) which invoke the action. The string may
be a single command key, or a sequence of up to 15 keys. The action is
the name of the less action, from the list below. The characters in
the string may appear literally, or be prefixed by a caret to indicate
a control key. A backslash followed by one to three octal digits may
be used to specify a character by its octal value. A backslash fol-
lowed by certain characters specifies input characters as follows:
\b BACKSPACE
\e ESCAPE
\n NEWLINE
\r RETURN
\t TAB
\ku UP ARROW
\kd DOWN ARROW
\kr RIGHT ARROW
\kl LEFT ARROW
\kU PAGE UP
\kD PAGE DOWN
\kh HOME
\ke END
\kx DELETE
A backslash followed by any other character indicates that character is
to be taken literally. Characters which must be preceded by backslash
include caret, space, tab and the backslash itself.
An action may be followed by an "extra" string. When such a command is
entered while running less, the action is performed, and then the extra
string is parsed, just as if it were typed in to less. This feature
can be used in certain cases to extend the functionality of a command.
For example, see the "{" and ":t" commands in the example below. The
extra string has a special meaning for the "quit" action: when less
quits, first character of the extra string is used as its exit status.
EXAMPLE
The following input file describes the set of default command keys used
by less:
#command
\r forw-line
\n forw-line
e forw-line
j forw-line
\kd forw-line
^E forw-line
^N forw-line
k back-line
y back-line
^Y back-line
^K back-line
^P back-line
J forw-line-force
K back-line-force
Y back-line-force
d forw-scroll
^D forw-scroll
u back-scroll
^U back-scroll
\40 forw-screen
f forw-screen
^F forw-screen
^V forw-screen
\kD forw-screen
b back-screen
^B back-screen
\ev back-screen
\kU back-screen
z forw-window
w back-window
\e\40 forw-screen-force
F forw-forever
R repaint-flush
r repaint
^R repaint
^L repaint
\eu undo-hilite
g goto-line
\kh goto-line
< goto-line
\e< goto-line
p percent
% percent
\e[ left-scroll
\e] right-scroll
\e( left-scroll
\e) right-scroll
{ forw-bracket {}
} back-bracket {}
( forw-bracket ()
) back-bracket ()
[ forw-bracket []
] back-bracket []
\e^F forw-bracket
\e^B back-bracket
G goto-end
\e> goto-end
> goto-end
\ke goto-end
= status
^G status
:f status
/ forw-search
? back-search
\e/ forw-search *
\e? back-search *
n repeat-search
\en repeat-search-all
N reverse-search
\eN reverse-search-all
& filter
m set-mark
’ goto-mark
^X^X goto-mark
E examine
:e examine
^X^V examine
:n next-file
:p prev-file
t next-tag
T prev-tag
:x index-file
:d remove-file
- toggle-option
:t toggle-option t
s toggle-option o
_ display-option
| pipe
v visual
! shell
+ firstcmd
H help
h help
V version
0 digit
1 digit
2 digit
3 digit
4 digit
5 digit
6 digit
7 digit
8 digit
9 digit
q quit
Q quit
:q quit
:Q quit
ZZ quit
PRECEDENCE
Commands specified by lesskey take precedence over the default com-
mands. A default command key may be disabled by including it in the
input file with the action "invalid". Alternatively, a key may be
defined to do nothing by using the action "noaction". "noaction" is
similar to "invalid", but less will give an error beep for an "invalid"
command, but not for a "noaction" command. In addition, ALL default
commands may be disabled by adding this control line to the input file:
#stop
This will cause all default commands to be ignored. The #stop line
should be the last line in that section of the file.
Be aware that #stop can be dangerous. Since all default commands are
disabled, you must provide sufficient commands before the #stop line to
enable all necessary actions. For example, failure to provide a "quit"
command can lead to frustration.
LINE EDITING SECTION
The line-editing section begins with the line:
#line-edit
This section specifies new key bindings for the line editing commands,
in a manner similar to the way key bindings for ordinary commands are
specified in the #command section. The line-editing section consists
of a list of keys and actions, one per line as in the example below.
EXAMPLE
The following input file describes the set of default line-editing keys
used by less:
#line-edit
\t forw-complete
\17 back-complete
\e\t back-complete
^L expand
^V literal
^A literal
\el right
\kr right
\eh left
\kl left
\eb word-left
\e\kl word-left
\ew word-right
\e\kr word-right
\ei insert
\ex delete
\kx delete
\eX word-delete
\ekx word-delete
\e\b word-backspace
\e0 home
\kh home
\e$ end
\ke end
\ek up
\ku up
\ej down
LESS ENVIRONMENT VARIABLES
The environment variable section begins with the line
#env
Following this line is a list of environment variable assignments.
Each line consists of an environment variable name, an equals sign (=)
and the value to be assigned to the environment variable. White space
before and after the equals sign is ignored. Variables assigned in
this way are visible only to less. If a variable is specified in the
system environment and also in a lesskey file, the value in the lesskey
file takes precedence. Although the lesskey file can be used to over-
ride variables set in the environment, the main purpose of assigning
variables in the lesskey file is simply to have all less configuration
information stored in one file.
EXAMPLE
The following input file sets the -i option whenever less is run, and
specifies the character set to be "latin1":
#env
LESS = -i
LESSCHARSET = latin1
SEE ALSO
less(1)
WARNINGS
It is not possible to specify special keys, such as uparrow, in a key-
board-independent manner. The only way to specify such keys is to
specify the escape sequence which a particular keyboard sends when such
a key is pressed.
On MS-DOS and OS/2 systems, certain keys send a sequence of characters
which start with a NUL character (0). This NUL character should be
represented as \340 in a lesskey file.
COPYRIGHT
Copyright (C) 2000-2009 Mark Nudelman
lesskey is part of the GNU project and is free software; you can redis-
tribute it and/or modify it under the terms of the GNU General Public
License as published by the Free Software Foundation; either version 2,
or (at your option) any later version.
lesskey is distributed in the hope that it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
for more details.
You should have received a copy of the GNU General Public License along
with lesskey; see the file COPYING. If not, write to the Free Software
Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
AUTHOR
Mark Nudelman
Send bug reports or comments to the above address or to bug-
less@gnu.org.
Version 436: 07 Jul 2009 LESSKEY(1)