signalのヘルプ・マニュアル
日本語 英語
signal --help
man signal
SIGNAL(2) Linux Programmer’s Manual SIGNAL(2)
名前
signal - ANSI C シグナル操作
書式
#include
typedef void (*sighandler_t)(int);
sighandler_t signal(int signum, sighandler_t sighandler);
説明
signal() の 動 作は Unix のバージョンにより異なる。また、歴史的に見て
Linux のバージョンによっても異なっている。このシステムコールの使用は 避
け、代わりに sigaction(2) を使用すること。下記の「移植性」を参照。
signal() はシグナル signum の処理方法を handler に設定する。 handler に
は、 SIG_IGN、 SIG_DFL、プログラマが定義した関数 (「シグナル・ハンド ラ
」) のアドレスのいずれかを指定する。
シグナル signum がプロセスに配送されると、以下のいずれかが発生する。
* 処理方法が SIG_IGN に設定されている場合、そのシグナルは無視される。
* 処理方法が SIG_DFL に設定されている場合、シグナルに関連づけられたデ
フォルトの動作が行われる (signal(7) 参照)。
* 処理方法として関数が設定されている場合、まず最初に処理方法が SIG_DFL
にリセットされるかそのシグナルのブロックが実行された後、 signum を引
き数として handler が呼び出される。ハンドラが起動される際にシグナ ル
がブロックされた場合、ハンドラが返る際にそのシグナルのブロックが解除
される。
シグナル SIGKILL と SIGSTOP は捕捉できず、無視することもできない。
返り値
signal() は、今までのシグナル・ハンドラの値を返す。エ ラ ー の 場 合 は
SIG_ERR を返す。
エラー
EINVAL signum が不正である。
準拠
C89, C99, POSIX.1-2001.
注意
マルチスレッドプロセスにおける signal() の結果は、指定されていない。
POSIX に よ ると、 kill(2) や raise(3) で生成できない SIGFPE, SIGILL,
SIGSEGV シグナルを無視した後の動作は未定義である。 0 による整数割り算の
結 果は未定義となる。ある種のアーキテクチャでは、これは SIGFPE シグナル
を生成する。 (同様に負の最大整数を -1 で割ると SIGFPE が生成されるか も
しれない。) このシグナルを無視すると無限ループに陥るかもしれない。
SIGCHLD の 動 作として SIG_IGN を設定した場合の詳細な動作については、
sigaction(2) を参照すること。
シグナル・ハンドラ内から安全に呼び出すことができる、 async-signal-safe
functions (非同期シングルで安全な関数) のリストについては signal(7) を
参照。
sighandler_t の使用は GNU 拡張である。各種バージョンの libc でこの型 は
定 義 済 み で ある; libc4 と libc5 では SignalHandler を定義している。
glibc では sig_t を定義しており、 _GNU_SOURCE が定義されている場合に は
sighandler_t も定義されている。このような型を使用しないと、 signal() の
宣言は読みにくいものとなる。
void ( *signal(int signum, void (*handler)(int)) ) (int);
移植性
移植性のある signal() の使い方は、シグナルの処理 方 法 を SIG_DFL か
SIG_IGN に設定する方法だけである。シグナル・ハンドラを設定するのに sig-
nal() を使ったときの動作はシステムにより異なる (POSIX.1 は明示的にこ の
違 いを認めている)。 移植性が必要なときはこのシステムコールを使用しない
こと。
POSIX.1 は、 sigaction(2) を規定することで移植性に関する混乱を解決し た
。 sigaction(2) はシグナル・ハンドラが起動される際の挙動を明示的に制御
できる。 signal() の代わりにこのインターフェイスを使うこと。
オリジナルの Unix システムでは、 signal() を使って設定されたハンドラ が
シグナルの配送により起動されると、そのシグナルの処理方法は SIG_DFL にリ
セットされ、システムは同じシグナルがさらに生成されてもシグナルの配送 を
ブ ロックしなかった。 System V でも、 signal() に対してこれらの挙動を規
定している。こうした挙動はまずく、ハンドラがハンドラ自身を再設定する 機
会 が来るより前に、同じシグナルがまた配送される可能性がある。さらに、同
じシグナルが立て続けに配送されると、同じシグナルがハンドラを繰り返し 起
動されることになる。
BSD では、シグナル処理の挙動を変更することで、この状況を改善した (しか
し、残念なことに、 signal() を使ってハンドラを設定する際に挙動が黙っ て
変 更される)。 BSD では、シグナルハンドラが起動された際、シグナルの処理
方法はリセットされず、ハンドラの実行中は、同じシグナルのさらなる生成 は
配送がブロックされる。
Linux での状況は以下の通りである。
* カーネルの signal() システムコールは System V 方式を提供している。
* デフォルトでは、glibc 2 以降では、 signal() ラッパー関数はカーネルの
システムコールを起動しない。代わりに、ラッパー関数は BSD 方式を示すフ
ラグを使って sigaction(2) を呼び出す。機能検査マクロ _BSD_SOURCE を定
義していれば、このデフォルトの動作と な る 。 デ フ ォ ル ト で は 、
_BSD_SOURCE が定義される。 _BSD_SOURCE は _GNU_SOURCE が定義された場
合には暗黙のうちに定義され、もちろん明示的に定義することもできる。
glibc 2 以降では、機能検査マクロ _BSD_SOURCE が定義されていなければ、
signal() は System V 方式となる。 (gcc(1) が標準指定モード (-std=xxx
or -ansi) で起動された場合、もしく は _POSIX_SOURCE, _XOPEN_SOURCE,
_SVID_SOURCE といった他の様々な機能検査マクロが定義された場合、デフォ
ルトの _BSD_SOURCE の暗黙の定義は行われない。 feature_test_macros(7)
を参照のこと。)
* Linux の libc4 と libc5 の signal() 関数は System V 方式である。
libc5 システムにおいて のかわりに をイン ク
ル ードすると、 signal() は __bsd_signal() に再定義され、 signal() は
BSD 方式となる。
関連項目
kill(1), alarm(2), kill(2), killpg(2), pause(2), sigaction(2), sig-
nalfd(2), sigpending(2), sigprocmask(2), sigqueue(2), sigsuspend(2),
bsd_signal(3), raise(3), siginterrupt(3), sigsetops(3), sigvec(3),
sysv_signal(3), feature_test_macros(7), signal(7)
Linux 2008-07-11 SIGNAL(2)
SIGNAL(2) Linux Programmer’s Manual SIGNAL(2)
NAME
signal - ANSI C signal handling
SYNOPSIS
#include
typedef void (*sighandler_t)(int);
sighandler_t signal(int signum, sighandler_t handler);
DESCRIPTION
The behavior of signal() varies across Unix versions, and has also var-
ied historically across different versions of Linux. Avoid its use:
use sigaction(2) instead. See Portability below.
signal() sets the disposition of the signal signum to handler, which is
either SIG_IGN, SIG_DFL, or the address of a programmer-defined func-
tion (a "signal handler").
If the signal signum is delivered to the process, then one of the fol-
lowing happens:
* If the disposition is set to SIG_IGN, then the signal is ignored.
* If the disposition is set to SIG_DFL, then the default action asso-
ciated with the signal (see signal(7)) occurs.
* If the disposition is set to a function, then first either the dis-
position is reset to SIG_DFL, or the signal is blocked (see Porta-
bility below), and then handler is called with argument signum. If
invocation of the handler caused the signal to be blocked, then the
signal is unblocked upon return from the handler.
The signals SIGKILL and SIGSTOP cannot be caught or ignored.
RETURN VALUE
signal() returns the previous value of the signal handler, or SIG_ERR
on error.
ERRORS
EINVAL signum is invalid.
CONFORMING TO
C89, C99, POSIX.1-2001.
NOTES
The effects of signal() in a multithreaded process are unspecified.
According to POSIX, the behavior of a process is undefined after it
ignores a SIGFPE, SIGILL, or SIGSEGV signal that was not generated by
kill(2) or raise(3). Integer division by zero has undefined result.
On some architectures it will generate a SIGFPE signal. (Also dividing
the most negative integer by -1 may generate SIGFPE.) Ignoring this
signal might lead to an endless loop.
See sigaction(2) for details on what happens when SIGCHLD is set to
SIG_IGN.
See signal(7) for a list of the async-signal-safe functions that can be
safely called from inside a signal handler.
The use of sighandler_t is a GNU extension. Various versions of libc
predefine this type; libc4 and libc5 define SignalHandler; glibc
defines sig_t and, when _GNU_SOURCE is defined, also sighandler_t.
Without use of such a type, the declaration of signal() is the somewhat
harder to read:
void ( *signal(int signum, void (*handler)(int)) ) (int);
Portability
The only portable use of signal() is to set a signal’s disposition to
SIG_DFL or SIG_IGN. The semantics when using signal() to establish a
signal handler vary across systems (and POSIX.1 explicitly permits this
variation); do not use it for this purpose.
POSIX.1 solved the portability mess by specifying sigaction(2), which
provides explicit control of the semantics when a signal handler is
invoked; use that interface instead of signal().
In the original Unix systems, when a handler that was established using
signal() was invoked by the delivery of a signal, the disposition of
the signal would be reset to SIG_DFL, and the system did not block
delivery of further instances of the signal. System V also provides
these semantics for signal(). This was bad because the signal might be
delivered again before the handler had a chance to reestablish itself.
Furthermore, rapid deliveries of the same signal could result in recur-
sive invocations of the handler.
BSD improved on this situation by changing the semantics of signal han-
dling (but, unfortunately, silently changed the semantics when estab-
lishing a handler with signal()). On BSD, when a signal handler is
invoked, the signal disposition is not reset, and further instances of
the signal are blocked from being delivered while the handler is exe-
cuting.
The situation on Linux is as follows:
* The kernel’s signal() system call provides System V semantics.
* By default, in glibc 2 and later, the signal() wrapper function does
not invoke the kernel system call. Instead, it calls sigaction(2)
using flags that supply BSD semantics. This default behavior is pro-
vided as long as the _BSD_SOURCE feature test macro is defined. By
default, _BSD_SOURCE is defined; it is also implicitly defined if one
defines _GNU_SOURCE, and can of course be explicitly defined.
On glibc 2 and later, if the _BSD_SOURCE feature test macro is not
defined, then signal() provides System V semantics. (The default
implicit definition of _BSD_SOURCE is not provided if one invokes
gcc(1) in one of its standard modes (-std=xxx or -ansi) or defines
various other feature test macros such as _POSIX_SOURCE,
_XOPEN_SOURCE, or _SVID_SOURCE; see feature_test_macros(7).)
* The signal() function in Linux libc4 and libc5 provide System V
semantics. If one on a libc5 system includes instead
of , then signal() provides BSD semantics.
SEE ALSO
kill(1), alarm(2), kill(2), killpg(2), pause(2), sigaction(2), sig-
nalfd(2), sigpending(2), sigprocmask(2), sigqueue(2), sigsuspend(2),
bsd_signal(3), raise(3), siginterrupt(3), sigsetops(3), sigvec(3),
sysv_signal(3), feature_test_macros(7), signal(7)
COLOPHON
This page is part of release 3.22 of the Linux man-pages project. A
description of the project, and information about reporting bugs, can
be found at http://www.kernel.org/doc/man-pages/.
Linux 2008-07-11 SIGNAL(2)