USERMOD(8) USERMOD(8) 名前 usermod - ユーザアカウントを修正する 書式 usermod [-c comment] [-d home_dir [-m]] [-e expire_date] [-f inactive_time] [-g initial_group] [-G group [,...]] [-l login_name] [-p passwd] [-s shell] [-u uid [-o]] [-L|-U] login 説明 usermod コマンドは、コマンドライン上での指定によって、システムアカウン トファイルを修正する。 usermod コマンドに指定できるオプションは次の通り 。 -c comment パ ス ワードファイルのコメントフィールドに与える新しい値。通常は chfn(1) ユーティリティによって変更される。 -d home_dir 新しいログインディレクトリ。 -m オプションを用いると、現在のホー ムディレクトリの中身が新しいホームディレクトリに移動される (後者 が存在しない場合は新たに作成される)。 -e expire_date そのユーザアカウントが使用不能になる日付。日付は YYYY-MM-DD とい う書式で指定する。 -f inactive_days パスワードの使用期限が切れてからアカウントが永久に使用不能になる までの日数。 0 にすると、パスワードの期限が切れると同時にこの ア カウントは使用不能になる。 -1 にするとこの機能が無効になる。デフ ォルト値は -1。 -g initial_group 新たにそのユーザのログイン時初期グループとするグループ名ま た は ID。グループ名は既に存在していなければならない。グループ番号は既 存のグループを参照していなければならない。デフォルトのグループ番 号は 1。 -G group,[...] ユーザが属する補助グループ (supplementary groups) のリスト。グル ープはコンマで区切り、間に空白文字を入れてはならない。指定できる グループには -g オプションと同様の制限がある。現在そのユーザが、 新しいリストにないグループのメンバーになっている場合は、そのグル ープから削除される。 -l login_name ユ ーザのログイン名を login から login_name に変更する。他は何も 変更しないので、おそらく新しいログイン名に合わせてホームディレク トリの名前を変更する必要があるだろう。 -p passwd crypt(3) の返り値である暗号化パスワード。 -s shell ユーザの新しいログインシェルの名前。このフィールドを空白にした場 合は、システムがデフォルトのログインシェルを選択する。 -u uid ユーザの ID 番号。この値は、-o オプションを用いる場合を除き、 他 と 重複してはならない。また非負値でなくてはならない。 0 から 999 までの値は、通常システムアカウント用に予約されている。ホームディ レクトリ以下の、そのユーザ所有のすべてのファイルのユーザ ID は、 自動的に新しい値に変更される。ホームディレクトリ以下にないファイ ルは手作業で変更しなければならない。 -L ユーザのパスワードをロックする。これは暗号化されたパスワードの前 に ’!’ を追加し、実質的にパスワードを無効にする。このオプショ ン を -p や -U と同時に用いることはできない。 -U ユーザのパスワードをアンロックする。これは暗号化されたパスワード の先頭の ’!’ を取り除く。このオプションを -p や -L と同時に用 い ることはできない。 警告 usermod は現在ログインしているユーザの名前を変更できない。このコマンド を使用してユーザの ID 番号を変更する際には、指定したユーザのプロセス が 一つも実行されていないことを事前に確認しなければならない。 crontab ファ イルの所有者は手作業で変更しなければならない。 at ジョブの所有者は手 作 業 で変更しなければならない。 NIS に関する作業は NIS サーバ上で行なわな ければならない。 ファイル /etc/passwd - ユーザアカウント情報 /etc/shadow - 安全なユーザアカウント情報 /etc/group - グループ情報 関連項目 chfn(1), chsh(1), passwd(1), crypt(3), groupadd(8), groupdel(8), group- mod(8), useradd(8), userdel(8) 著者 Julianne Frances Haugh (jockgrrl@ix.netcom.com) USERMOD(8)
USERMOD(8) System Management Commands USERMOD(8) NAME usermod - modify a user account SYNOPSIS usermod [options] LOGIN DESCRIPTION The usermod command modifies the system account files to reflect the changes that are specified on the command line. OPTIONS The options which apply to the usermod command are: -a, --append Add the user to the supplementary group(s). Use only with the -G option. -c, --comment COMMENT The new value of the user´s password file comment field. It is normally modified using the chfn(1) utility. -d, --home HOME_DIR The user´s new login directory. If the -m option is given, the contents of the current home directory will be moved to the new home directory, which is created if it does not already exist. If the current home directory does not exist the new home directory will not be created. -e, --expiredate EXPIRE_DATE The date on which the user account will be disabled. The date is specified in the format YYYY-MM-DD. An empty EXPIRE_DATE argument will disable the expiration of the account. This option requires a /etc/shadow file. A /etc/shadow entry will be created if there were none. -f, --inactive INACTIVE The number of days after a password expires until the account is permanently disabled. A value of 0 disables the account as soon as the password has expired, and a value of -1 disables the feature. This option requires a /etc/shadow file. A /etc/shadow entry will be created if there were none. -g, --gid GROUP The group name or number of the user´s new initial login group. The group must exist. Any file from the user´s home directory owned by the previous primary group of the user will be owned by this new group. The group ownership of files outside of the user´s home directory must be fixed manually. -G, --groups GROUP1[,GROUP2,...[,GROUPN]]] A list of supplementary groups which the user is also a member of. Each group is separated from the next by a comma, with no intervening whitespace. The groups are subject to the same restrictions as the group given with the -g option. If the user is currently a member of a group which is not listed, the user will be removed from the group. This behaviour can be changed via the -a option, which appends the user to the current supplementary group list. -l, --login NEW_LOGIN The name of the user will be changed from LOGIN to NEW_LOGIN. Nothing else is changed. In particular, the user´s home directory or mail spool should probably be renamed manually to reflect the new login name. -L, --lock Lock a user´s password. This puts a ´!´ in front of the encrypted password, effectively disabling the password. You can´t use this option with -p or -U. Note: if you wish to lock the account (not only access with a password), you should also set the EXPIRE_DATE to 1. -m, --move-home Move the content of the user´s home directory to the new location. If the current home directory does not exist the new home directory will not be created. This option is only valid in combination with the -d (or --home) option. usermod will try to adapt the ownership of the files and to copy the modes, ACL and extended attributes, but manual changes might be needed afterwards. -o, --non-unique When used with the -u option, this option allows to change the user ID to a non-unique value. -p, --password PASSWORD The encrypted password, as returned by crypt(3). Note: This option is not recommended because the password (or encrypted password) will be visible by users listing the processes. You should make sure the password respects the system´s password policy. -R, --root CHROOT_DIR Apply changes in the CHROOT_DIR directory and use the configuration files from the CHROOT_DIR directory. -s, --shell SHELL The name of the user´s new login shell. Setting this field to blank causes the system to select the default login shell. -u, --uid UID The new numerical value of the user´s ID. This value must be unique, unless the -o option is used. The value must be non-negative. The user´s mailbox, and any files which the user owns and which are located in the user´s home directory will have the file user ID changed automatically. The ownership of files outside of the user´s home directory must be fixed manually. No checks will be performed with regard to the UID_MIN, UID_MAX, SYS_UID_MIN, or SYS_UID_MAX from /etc/login.defs. -U, --unlock Unlock a user´s password. This removes the ´!´ in front of the encrypted password. You can´t use this option with -p or -L. Note: if you wish to unlock the account (not only access with a password), you should also set the EXPIRE_DATE (for example to 99999, or to the EXPIRE value from /etc/default/useradd). -Z, --selinux-user SEUSER The new SELinux user for the user´s login. A blank SEUSER will remove the SELinux user mapping for user LOGIN (if any). CAVEATS You must make certain that the named user is not executing any processes when this command is being executed if the user´s numerical user ID, the user´s name, or the user´s home directory is being changed. usermod checks this on Linux, but only check if the user is logged in according to utmp on other architectures. You must change the owner of any crontab files or at jobs manually. You must make any changes involving NIS on the NIS server. CONFIGURATION The following configuration variables in /etc/login.defs change the behavior of this tool: MAIL_DIR (string) The mail spool directory. This is needed to manipulate the mailbox when its corresponding user account is modified or deleted. If not specified, a compile-time default is used. MAIL_FILE (string) Defines the location of the users mail spool files relatively to their home directory. The MAIL_DIR and MAIL_FILE variables are used by useradd, usermod, and userdel to create, move, or delete the user´s mail spool. If MAIL_CHECK_ENAB is set to yes, they are also used to define the MAIL environment variable. MAX_MEMBERS_PER_GROUP (number) Maximum members per group entry. When the maximum is reached, a new group entry (line) is started in /etc/group (with the same name, same password, and same GID). The default value is 0, meaning that there are no limits in the number of members in a group. This feature (split group) permits to limit the length of lines in the group file. This is useful to make sure that lines for NIS groups are not larger than 1024 characters. If you need to enforce such limit, you can use 25. Note: split groups may not be supported by all tools (even in the Shadow toolsuite). You should not use this variable unless you really need it. FILES /etc/group Group account information. /etc/gshadow Secure group account information. /etc/login.defs Shadow password suite configuration. /etc/passwd User account information. /etc/shadow Secure user account information. SEE ALSO chfn(1), chsh(1), passwd(1), crypt(3), gpasswd(8), groupadd(8), groupdel(8), groupmod(8), login.defs(5), useradd(8), userdel(8). shadow-utils 4.1.5.1 05/10/2016 USERMOD(8)
コロナウイルスの日ごとの感染者数・死者数をグラフ化してみました。どの国が増加傾向にあり、どの国が終息に向かっているかを視覚化しています。
Copyright(C) linux-cmd.com All Rights Reserved. Author Takayuki Yukawa